Comparison of next-generation portable pollution monitors to measure exposure to PM2.5 from household air pollution in Puno, Peru.

Assessment of personal exposure to PM2.5 is critical for understanding intervention effectiveness and exposure-response relationships in household air pollution studies. In this pilot study, we compared PM2.5 concentrations obtained from two next-generation personal exposure monitors (the Enhanced Children MicroPEM or ECM; and the Ultrasonic Personal Air Sampler or UPAS) to those obtained with a traditional Triplex Cyclone and SKC Air Pump (a gravimetric cyclone/pump sampler). We co-located cyclone/pumps with an ECM and UPAS to obtain 24-hour kitchen concentrations and personal exposure measurements. We measured Spearmen correlations and evaluated agreement using the Bland-Altman method. We obtained 215 filters from 72 ECM and 71 UPAS co-locations. Overall, the ECM and the UPAS had similar correlation (ECM ρ = 0.91 vs UPAS ρ = 0.88) and agreement (ECM mean difference of 121.7 µg/m3 vs UPAS mean difference of 93.9 µg/m3 ) with overlapping confidence intervals when compared against the cyclone/pump. When adjusted for the limit of detection, agreement between the devices and the cyclone/pump was also similar for all samples (ECM mean difference of 68.8 µg/m3 vs UPAS mean difference of 65.4 µg/m3 ) and personal exposure samples (ECM mean difference of -3.8 µg/m3 vs UPAS mean difference of -12.9 µg/m3 ). Both the ECM and UPAS produced comparable measurements when compared against a cyclone/pump setup

Amplified surface warming in the south-west Pacific during the mid-Pliocene (3.3–3.0 Ma) and future implications

Based on Nationally Determined Contributions concurrent with Shared Socioeconomic Pathways (SSPs) 2-4.5, the IPCC predicts global warming of 2.1–3.5 ∘C (very likely range 10–90th percentile) by 2100 CE. However, global average temperature is a poor indicator of regional warming and global climate models (GCMs) require validation with instrumental or proxy data from geological archives to assess their ability to simulate regional ocean and atmospheric circulation, and thus, to evaluate their performance for regional climate projections. The south-west Pacific is a region that performs poorly when GCMs are evaluated against instrumental observations. The New Zealand Earth System Model (NZESM) was developed from the United Kingdom Earth System Model (UKESM) to better understand south-west Pacific response to global change, by including a nested ocean grid in the south-west Pacific with 80 % greater horizontal resolution than the global-scale host.Here, we reconstruct regional south-west Pacific sea-surface temperatures (SSTs) for the mid-Pliocene warm period (mPWP; 3.3–3.0 Ma), which has been widely considered a past analogue with an equilibrium surface temperature response of +3 ∘C to an atmospheric CO2 concentration of ∼350–400 ppm, in order to assess the warming distribution in the south-west Pacific. This study presents proxy SSTs from seven deep sea sediment cores distributed across the south-west Pacific. Our reconstructed SSTs are derived from molecular biomarkers preserved in the sediment – alkenones (i.e. U index) and isoprenoid glycerol dialkyl glycerol tetraethers (i.e. TEX86 index) – and are compared with SSTs reconstructed from the Last Interglacial (125 ka), Pliocene Model Intercomparison Project (PlioMIP) outputs and transient climate model projections (NZESM and UKESM) of low- to high-range SSPs for 2090–2099 CE.Mean interglacial equilibrium SSTs during the mPWP for the south-west Pacific sites were on average 4.2 ∘C (1.8–6.1 ∘C likely range) above pre-industrial temperatures and show good agreement with model outputs from NZESM and UKESM under mid-range SSP 2–4.6 conditions. These results highlight that not only is the mPWP an appropriate analogue when considering future temperature change in the centuries to come, but they also demonstrate that the south-west Pacific region will experience warming that exceeds that of the global mean if atmospheric CO2 remains above 350 ppm

Lung Toxicity of Ambient Particulate Matter from Southeastern U.S. Sites with Different Contributing Sources: Relationships between Composition and Effects

BACKGROUND: Exposure to air pollution and, more specifically, particulate matter (PM) is associated with adverse health effects. However, the specific PM characteristics responsible for biological effects have not been defined. OBJECTIVES: In this project we examined the composition, sources, and relative toxicity of samples of PM with aerodynamic diameter ≥2.5 μm (PM(2.5)) collected from sites within the Southeastern Aerosol Research and Characterization (SEARCH) air monitoring network during two seasons. These sites represent four areas with differing sources of PM(2.5), including local urban versus regional sources, urban areas with different contributions of transportation and industrial sources, and a site influenced by Gulf of Mexico weather patterns. METHODS: We collected samples from each site during the winter and summer of 2004 for toxicity testing and for chemical analysis and chemical mass balance–based source apportionment. We also collected PM(2.5) downwind of a series of prescribed forest burns. We assessed the toxicity of the samples by instillation into rat lungs and assessed general toxicity, acute cytotoxicity, and inflammation. Statistical dose–response modeling techniques were used to rank the relative toxicity and compare the seasonal differences at each site. Projection-to-latent-surfaces (PLS) techniques examined the relationships among sources, chemical composition, and toxicologic end points. RESULTS AND CONCLUSIONS: Urban sites with high contributions from vehicles and industry were most toxic

Exposure Assessment in the National Children’s Study: Introduction

The science of exposure assessment is relatively new and evolving rapidly with the advancement of sophisticated methods for specific measurements at the picogram per gram level or lower in a variety of environmental and biologic matrices. Without this measurement capability, environmental health studies rely on questionnaires or other indirect means as the primary method to assess individual exposures. Although we use indirect methods, they are seldom used as stand-alone tools. Analyses of environmental and biologic samples have allowed us to get more precise data on exposure pathways, from sources to concentrations, to routes, to exposure, to doses. They also often allow a better estimation of the absorbed dose and its relation to potential adverse health outcomes in individuals and in populations. Here, we make note of various environmental agents and how best to assess exposure to them in the National Children’s Study—a longitudinal epidemiologic study of children’s health. Criteria for the analytical method of choice are discussed with particular emphasis on the need for long-term quality control and quality assurance measures

Biogeosciences perspectives on integrated, coordinated, open, networked (ICON) science

This article is composed of three independent commentaries about the state of ICON principles (Goldman et al. 2021) in the AGU Biogeosciences section and discussion on the opportunities and challenges of adopting them. Each commentary focuses on a different topic: Global collaboration, technology transfer and application (Section 2), Community engagement, citizen science, education, and stakeholder involvement (Section 3), and Field, experimental, remote sensing, and real-time data research and application (Section 4). We discuss needs and strategies for implementing ICON and outline short- and long-term goals. The inclusion of global data and international community engagement are key to tackle grand challenges in biogeosciences. Although recent technological advances and growing open-access information across the world have enabled global collaborations to some extent, several barriers ranging from technical to organizational to cultural have remained in advancing interoperability and tangible scientific progress in biogeosciences. Overcoming these hurdles is necessary to address pressing large-scale research questions and applications in the biogeosciences, where ICON principles are essential. Here, we list several opportunities for ICON, including coordinated experimentation and field observations across global sites, that are ripe for implementation in biogeosciences as a means to scientific advancements and social progress

Biogeosciences Perspectives on Integrated, Coordinated, Open, Networked (ICON) Science

This article is composed of three independent commentaries about the state of Integrated, Coordinated, Open, Networked (ICON) principles in the American Geophysical Union Biogeosciences section, and discussion on the opportunities and challenges of adopting them. Each commentary focuses on a different topic: (a) Global collaboration, technology transfer, and application (Section 2), (b) Community engagement, community science, education, and stakeholder involvement (Section 3), and (c) Field, experimental, remote sensing, and real-time data research and application (Section 4). We discuss needs and strategies for implementing ICON and outline short- and long-term goals. The inclusion of global data and international community engagement are key to tackling grand challenges in biogeosciences. Although recent technological advances and growing open-access information across the world have enabled global collaborations to some extent, several barriers, ranging from technical to organizational to cultural, have remained in advancing interoperability and tangible scientific progress in biogeosciences. Overcoming these hurdles is necessary to address pressing large-scale research questions and applications in the biogeosciences, where ICON principles are essential. Here, we list several opportunities for ICON, including coordinated experimentation and field observations across global sites, that are ripe for implementation in biogeosciences as a means to scientific advancements and social progress

El Nino and Health Risks from Landscape Fire Emissions in Southeast Asia

Emissions from landscape fires affect both climate and air quality. Here, we combine satellite-derived fire estimates and atmospheric modelling to quantify health effects from fire emissions in southeast Asia from 1997 to 2006. This region has large interannual variability in fire activity owing to coupling between El Nino-induced droughts and anthropogenic land-use change. We show that during strong El Nino years, fires contribute up to 200 micrograms per cubic meter and 50 ppb in annual average fine particulate matter (PM2.5) and ozone surface concentrations near fire sources, respectively. This corresponds to a fire contribution of 200 additional days per year that exceed the World Health Organization 50 micrograms per cubic metre 24-hr PM(sub 2.5) interim target and an estimated 10,800 (6,800-14,300)-person (approximately 2 percent) annual increase in regional adult cardiovascular mortality. Our results indicate that reducing regional deforestation and degradation fires would improve public health along with widely established benefits from reducing carbon emissions, preserving biodiversity and maintaining ecosystem services